ICS 680ES PG-10 76.5cc Petrol Powergrit Diamond Chain Saw For Pipe Cutting
Built to provide a combination of performance and portability for cutting in-ground utility pipe, the 680ES-PG gas powered utility chain saw with PowerGrit chain will change the way to cut pipe. This affordably priced gas powered saw, allows you to cut up to 10" deep from one side into ductile iron, cast iron, PVC, HDPE and is also cabable of running the full line of FORCE3 chains. With a quick switch of guidebar, chain and drive sprocket, you have the ability to use this saw in masonry, stone and even reinforced concrete. Making it the most cost effective, versatile tool in your arsenal.
Better operator control.
Reduced excavation required.
Engine Type 2-stroke, Air Cooled.
Displacement 76.5 cc (4.7 cu-in).
Horsepower 3.7 kW (5 hp) @ 9,500 rpm.
Torque 4.1 Nm (36.3 in-lbs) @ 6,500 rpm.
Engine Speed 11500 +/- 500 rpm (max) / 2,800 - 3,200 rpm (Idle).
Chain Speed at Maximum Power 34.5 m/s (6800 ft /min).
Weight 9.5 kg (21 lbs) powerhead only.
Dimensions 46 cm (18 in) length / 29 cm (11.5 in) height / 25 cm (10 in) width.
Starter Dust and water resistant.
Ignition Special water resistant electronic ignition.
Fuel ratio 4% (25:1) gasoline-to-oil.
Fuel Capacity 0.88 liter (0.23 gallon).
Water Supply Requirement Minimum: 1.5 bar (20 psi).
Water Flow Requirement Minimum: 4 lpm (1 gpm).
Guaranteed Sound Power Level, Lwa (1) 117 dB(A) (Kwa=3.0 dB(A)).
Equivalent Sound Pressure at the Operator's Ear Lwa 101.0 dB(A) (K = 2.0 dB(A)).
Vibration, ahv eq Concrete Cutting (2) 7.2 m/s2 (K=1.0 m/s2) Front Handle/8.5 m/s2 (K=1.0 m/s2) Rear Handle.
ICS 680EA Powerhead.
ICS Force4 Guidebar.
ICS Powergrit Utility Chain.
|Manufacturers Product Code||580423|
|Bar Length||10" / 25cm|
You may also like...
Starting at: £1,589.00
Starting at: £2,320.00
Starting at: £2,469.00
£2,699.00 inc. VAT