ICS 695XL PG-16 94cc Petrol Powergrit Diamond Chain Saw For Pipe Cutting
The new 695XL-PG features include an easy to start engine with higher energy ignition system and durable, long-lasting components including a new muffler, carburetor and piston & cylinder. Running on the ICS Powergrit chains, this saw allows you to cut up to 16" deep from one side into ductile iron, cast iron, PVC, HDPE and Insituform lining. As well as this, this saw can run the full range of FORCE3, FORCE4 & PROFORCE Chains with a quick change of guidebar, chain and drive sprocket.
Use ductile iron pipe, cast iron pipe.
Most versatile gas-powered saw.
New piston and cylinder lowers engine temperature.
Better operator control.
Longer life muffler with reinforced internal baffle.
Easy-to-start with higher energy ignition system.
New easy-to-tune carburetor.
Engine Type 2-Stroke, Air Cooled.
Displacement 94cc (5.7 cu-in).
Horsepower 4.8kW (6.4 hp) @ 9000 rpm.
Torque 5.7 Nm (50.4 in-lbs) @ 7200 rpm.
Engine Speed 9,300 +/- 150 rpm (max)/2,700 +/- 100 rpm (idle).
Chain Speed at Maximum Power 28 m/s (5500 ft /min).
Weight 9.5 kg (21 lbs) powerhead only.
Dimensions 46cm (18") L x 36cm (14") H x 30cm (12") W.
Starter Recoil, dust and water resistant.
Ignition Special water resistant electronic ignition.
Fuel ratio 2% (50:1) gasoline-to-oil.
Fuel Capacity 1 liter (0.26 gallon).
Water Supply Requirement Minimum: 1.5 bar (20 psi).
Water Flow Requirement Minimum: 1.5 bar (20 psi).
Guaranteed Sound Power Level, Lwa (1) 115 dB(A); (Kwa=1.0 dB(A)).
Equivalent Sound Pressure at the Operator's Ear Lwa 104.6 dB(A) (K=1.0 dB(A)).
Vibration, ahv eq Concrete Cutting (2) 3.6 m/s2 (K=1.0 m/s2) Front Handle/3.1 m/s2 (K=1.0 m/s2) Rear Handle.
Vibration, ahv eq Pipe Cutting (2) 5.62 m/s (K=0.2 m/s2) Front Handle/5.28 m/s2 (K=0.2 m/s2) Rear Handle.
ICS 695XL Powerhead.
ICS FORCE4 Guidebar.
ICS PowerGrit Chain.
|Manufacturers Product Code||575827|
|Bar Length||16" / 40cm|
You may also like...
Starting at: £2,320.00
Starting at: £2,469.00