Lincoln Powertec 425S LF24M 420A Welder + Coolant 'Ready To Weld'
Powerful potential, Technical triumph - With the full range of Powertec power sources and the LF22M & 24M (Pro) wire feeders, Lincoln is able to offer you unrivalled choice of step voltage MIG machines. With multiple output levels available across the power source range; 2 or 4 roll feeders with or without meters and a variety of interchangeable features, the choice is huge: there are 12 different combinations which give the Powertec range unparalleled flexibility. Design of the LF22M, 24M and 24M Pro feeders focused on ruggedness, physical dimensions and ease of use. The result is an incredibly rugged casing with the primary controls on the exterior and secondary controls secure within the protective casing close to the wire drive.
Products developed with a focus on applications.
Superb Arc behaviour with Argon Mix and 100% CO2.
Voltage selectors with multiple steps for precise adjustment.
Two choke tabs to support superb Arc behaviour.
Fan as needed (F.A.N.™).
Bright digital volt and ammeter with LF24M and LF24M Pro.
Completed with an extensive set of features.
Large diameter wheels - push/pull bar and lifting eyes.
3 year parts & labour warranty.
K14065-1W - LF-24M Four-Roll Wire Feeder - Air/Water-Cooled.
K10347-PGW-5M - Water-Cooled Power Source to wire feeder cable 5m.
K10429-505-4M - LGS 505 W Water-Cooled MIG Torch 4m.
3101583 - Lincoln Gas Regulator (0-30 LPM).
9101340 - Hose Nut and Nipple Set.
K14037-1 - COOLARC 25.
K10420-1 - Acorox Coolant (2 x 5ltr).
Processes: MIG, Flux-Cored.
Input Power: 230v / 400v / 3 phase/50-60Hz.
Rated Output: 420A / 35V@40%. 345A / 31.5V@60%.
Input Current: 50A/32A.
Output Range: 30-420A.
Dimensions (H x W x D): 875mm x 700mm x 1035mm.
|Manufacturers Product Code||K14061-2W/24/RWP|
|Input Current||50/32 amp|
You may also like...
£2,819.00 inc. VAT
£3,349.00 inc. VAT
£3,849.00 inc. VAT