SIP Weldmate T211P ARC welder with infinitely step-less output giving superb versatility and electrode to power gauge to enable rapid setting of output current. Giving an approximate weld thickness of 2mm - 8mm (mild steel), 1.6mm - 5mm electrode size and 60 - 200amps (peak) current range. This Arc Welder requires a 230v (20amp) power supply. 230v and 400v dual voltage capability, 200amp peak power, welds up to 8mm mild steel, wheel mounted for easy portability. Wheel mounted. Variable step-less output. Electrode to power gauge- enables rapid setting of output current.
Comes with 2m welding cable with electrode holder, 2m earth cable with earth clamp, hand-held face shield, chipping hammer and wheel kit.
Supply: 230v (13amp) / 400v (10amp)
Welding Current: 60 to 200amp
Electrode size: 1-6.5mm
Open Circuit Voltage: 50v
Insulation: Class F
Approx. Weld Thickness Range: (mild steel) 2-8mm
Manufacturers Product Code 05721 Voltage 415V Input Current 20 amp Ampage 200 Amp
Questions about SIP Weldmate T211P 200 Amp ARC Dual Welder 230v 400v
Q: Hi, which plug should be fitted to welder. Is welder set up as 230v or 400v as standard
This is a 230V (Single Phase) welder, it is rated at 13 amp. So, it should take a normal 3 pin plug. Although it may be advisable to run on a 16 amp (blue plug) if running at full capacity regularly.