Stihl MS241C-M 42.6cc Professional Petrol Chain Saw M Tronic
The new STIHL MS 241 C-M professional chain saw is compact, agile and raring to go, with M-Tronic as standard. Fuel metering is controlled electronically and automatically adjusts to environmental conditions, to deliver optimal engine performance. Other great features include: an easy to clean HD2 filter, new STIHL professional anti-vibration system, chain tensioner, 'patented' captive nuts on the chain sprocket cover, easy access quick-lock bayonet fittings on one-piece shroud and memory function.
The HD2 filter is made from polyethylene filter material with up to 70% finer pores than fleece and polyamide filters to trap even very fine dust. In addition, it is oil and water-repellent and thus very easy to clean. The PET-covered round filter cartridge with quick-release lock enables the filter to be assembled and disassembled in next to no time, without using tools.
This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed - even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.
Reduced-Emission Engine Technology
2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
Advanced Combustion Technology
Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result is lower fuel consumption and high torque across a broad rpm range.
Pre-Separation Air Filtration System
STIHL long-life air filtration systems with pre-separation achieve perceptibly longer filter life compared with conventional filter systems. Air drawn in is swirled. The larger, heavier particles are ejected. The pre-cleaned air is routed to the air filter via the pre-separator duct.
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine's engine are dampened which significantly reduces vibrations at the handles.
STIHL ElastoStart reduces the shock caused by the compression of the engine during starting. The compression shock is taken away from the user's joints and muscles through a spring or rubber element in the starter handle.
Tool Free Filler Caps
Special catches on the fuel and oil tanks for easy opening and locking without the need for tools.
The decompression valve is part of the easy starting system. The valve should be pressed before starting to reduce the compression pressure when starting, as well as reducing the effort needed to pull the starter rope. The decompression valve is semi-automatic; it must be pressed manually before starting, but then closes automatically.
This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.
Ematic Chain Lubrication System
The Ematic chain lubrication system ensures pinpoint lubrication of the saw chain links and guide bar rails. When used with STIHL OILOMATIC saw chain, it will provide maximum lubrication, longer wear and less oil consumption than conventional methods of chain lubrication. The Ematic system can reduce bar oil consumption by up to 50%.
Side Chain Tensioner
The tensioning screw can be found on the side of the chain saw through the sprocket cover. This removes the need for contact with the sharp saw chain.
Power-to-weight ratio: 2.1kg/kW.
Power output: 2.2kW / 3.0bhp.
Vibration levels left/right: 2.9/2.9m/s
Sound power level: 112dB(A).
Sound pressure level: 102dB(A).
Manufacturers Product Code STH1143200010 Fuel Type 2 Stroke Engine Manufacturer Stihl Ignition Type Recoil Power Output 2.2kW / 3.0bhp Weight 4.7Kg Noise Level dB(A) 112.0 Engine Size 42.6cc Use Rating Forestry Warranty 2 Years
Questions about Stihl MS241C-M 42.6cc Professional Petrol Chain Saw M TronicThis product has no questions yet.
You may also like...
Starting at: £609.00
Starting at: £609.00
Starting at: £499.00